You might have seen the Hackerspace Passport concept recently. Mitch Altman, inveterate hacker and noisebridge organiser came up with the idea, and it’s taken off like wildfire.
Make sure you get your hackerspace passport stamped next time you’re in the space! If you don’t have a passport you can:
• Get your notebook stamped instead!
• Download the PDF here and print your own
• Buy a passport from Seeedstudio here for less than $3
Next time you’re going travelling, you might want to check the list of hackerspaces to see if there’s a place you can drop in and see what they’re up to. It’s getting harder and harder to find a city where there isn’t one now!
Members from RnD have visited hackerspaces all around America, Japan, China, Europe and also been visited by people from all over the world in return.
It’s actually quite easy to make your own stamp, if you have access to a lasercutter. And it turns out common lino (easily obtainable at a craft shop) works like a treat with raster engraving.
Here’s the lino being laser engraved and cut: (Note: it’s important to check your rubber material doesn’t contain PVC or chlorine before lasering. Use the ‘copper stick in a blowtorch test’ for this!’)
The Big CNC:
A while ago Scott McDaid kindly donated to the space a large ‘Joe’s CNC’ he built. It’s a beautiful machine and has had many hours of work put into its construction.
The work envelope of the machine is huge, 600x1200 at least and it’s capable of milling wood, plastic and some metals.
We’ve just gotten it set up in the garage and got the cabling sorted out. Need to add some e-stops and things, but it looks pretty good so far!
Big thanks to Ada and Pauline for the setup.
Here’s a vid of the machine in operation. It’s cutting a depth-mapped version of our logo. Sadly we only had 6mm tools, so it’s a little like drawing with a crayon. But you can see the concept: